Air System Products RD11-T - Robo-Drain - External Pneumatic Condensate Drain

Description

Air System Products RD11-T - Robo-Drain - External Pneumatic Condensate Drain
Air System Products RD11-T - Robo-Drain - External Pneumatic Condensate Drain for Compressed Air Systems
A fully automatic, zero loss drain that protects compressed air systems with out the need for electricity. Translucent reservoir for visual assurance of operation. Ideal to be used along with Oil/Water Separators.
Demand drains use a sensor mechanism (a float ball connected to a level sensor) to detect when the condensate level has reached full capacity inside the drain before actuating the valve and releasing the condensate. That avoids any chance of the drain opening too often or not often enough, and also eliminates any air loss by leaving a residual amount of condensate inside the reservoir when it actuates to prevent any air escaping.
Features:
Large 24 oz. capacity discharge
Isolated trigger assembly
Heavy duty industrial drain
Horizontal low profile
Translucent reservoir
Non clogging, full port drain valve
Automatic design
NPT or BSPP connections available
Benefits:
Ideal for most compressor installations
Reliable design – unaffected by contaminants
One unit works for multiple compressed air systems. Saves valuable air. Saves money
Fits in tight spots – can be mounted under equipment
Easy-to-see condensate level “Quick check”
Handles scale and rust without clogging
No electricity required
Operates on demand
How it Removes Condensate From Compressed Air Systems
Condensate enters the drain through one of two inlet connections. As condensate is collected and the translucent reservoir fills, a stainless steel float mechanism rises. When the condensate reaches a design level, the float mechanism actuates an isolated magnetic trigger assembly. The trigger assembly directs control air to the valve actuator, which in turn opens a full-port drain valve.
Condensate will then exit the unit. As the float drops, the trigger assembly closes the control air line and the valve actuator closes the ball valve. The drain is then returned to the collection mode.
Specifications:
Inlets
(2) 3/4″ NPT (BSPP Connections Available)
Outlet
1/2″ NPT or (BSPP Connections Available)
Power
Clean, Dry Compressed Air 80 to 130 PSI
Pressure
0 to 250 PSI
Operating Temperature
32° to 180° F.
Weight
17 lbs.
Discharge
24 ounces per cycle
Materials:
Reservoir
Aluminum and Composite
Valve
Bronze w/S.S. Ball and Stem
Float
Stainless Steel
Seat
Stainless Steel
Seal
Viton
®
FastoolNow on eBay